Date & Time - Axis 213 PTZ User Manual

AXIS 213 - System Options
42
The users from these IP addresses need to be specified in the user list with the
appropriate access rights (User, Operator or Administrator).
Referrals - to prevent unauthorized sources from including the video stream from the
AXIS 213 into external Web pages, check the Referrals checkbox and enter the IP
address or Host name of the computer that hosts the Web pages with the included
video stream. Several IP addresses/host names can be defined and are separated by
semicolons(;)
Date & Time
Current Server Time - displays the current date and time (24h clock). If this has not
been configured, the time displayed is the default setting. The time can be displayed
in 12h clock format in the Overlay Images (see below).
New Server Time - Select your time zone from the drop-down list and check the
daylight saving time changes, if desired.
From the Time Mode section, select the preferred method to use for setting the time:
• Synchronize with computer time - sets the time from the clock on your computer.
• Synchronize with NTP Server - the AXIS 213 will obtain the time from an NTP
server every 60 minutes. Specify the NTP server's IP address or host name.
Note that if using a host name for the NTP server, a DNS server must be configured
under TCP/IP settings. See Network > TCP/IP below.
Set manually - this option allows you to manually set the time and date.
Date & Time Format Used in Images - specify the formats for the date and time (12h
or 24h) displayed in the Live View video streams.
Use the predefined formats or use your own custom date and time formats. See
Advanced File Naming & Date/Time Formats in the help files
how to create your own file formats.
for information on