Table of Contents
Advertisement
Overview
The simulation display module simulates all functions of
a display module installed on XM and XM PFP propor-
tioners.
For more information about the icons, screens, and
functions of the display module, see:
•
Manual 312359 for XM system
•
Manual 3A2776 for XM PFP system
Simulation
Use the blue simulation token 16N498 provided to put
the display into simulation mode. When the blue token is
inserted into the programming connector on the display,
the display simulates the XM and XM PFP systems and
will not communicate with other electronic modules.
When the blue token is removed from the programming
connector, the display will act like a normal module and
can be used in the XM or XM PFP system.
407061B
System Selection
The display simulates an XM system when shipped from
Graco. To switch between XM and XM PFP, complete
the following steps.
1. Enter Setup mode.
2. Navigate to the Software Versions screen.
3. Press
.
Overview
3
Advertisement
Table of Contents
