Advertisement
Electrical Equipment
•
Attach Taillight L-Brackets using two
short bolts and lock washers. Place
License Plate bracket under the tail light
for the driver's side of the trailer. The
studs on the light go through the License
Plate Bracket and then through the
Taillight L-Bracket. Wiring on the
taillights is color coded. Make sure that
the wiring for the Taillights is run
through the loops and holes on the
trailer. After mounting the taillights,
connect the wiring with the bullet
connectors. Press firmly to ensure a
L-Bracket Bolts
good connection.
Lisence Plate Bracket
Ground Lead
Tail Light
Trailer Frame
Tail Light Wiring
Connectors
Tail Light Bolts
Mounting Holes
Connect the Running Lights to the side
of the trailer. Before fastening the lights
to the trailer, start one screw through the
Mounting Hole and through the Ground
Mounted Running Light
Lead on the same side. Do this with
both Running Lights. The Running
Lights can be used on either side of the
trailer. Using a Phillips Screwdriver
fasten the Running Lights to the Trailer.
Wiring Main Connection
Connect the wires by pressing firmly.
With all the wires connected firmly
tighten the wiring away from the lights
towards the Tongue. Connect the wiring
to the wires that are in the Tongue. Pull
Wiring Harness
this slack in the wiring from the Trailer
Coupler as well.
Advertisement
