Table of Contents
Advertisement
Quick Links
Owner's Manual
Instructions for Assembly, Testing, Operation, and Servicing
Trailer Kit: Outdoor agricultural product used to tow Item# 268170
READ and UNDERSTAND the Owner's Manual completely before using this trailer kit.
Assemble, test, and use only in accordance with the Owner's Manual instructions.
EXERCISE CAUTION in vehicle handling when towing sprayer to avoid loss of control
or rollover.
Improper use of the trailer kit could result in serious injury to the operator or nearby
persons.
Any Questions, Comments, Problems, or Parts Orders
Call NorthStar Product Support 1-800-270-0810
ITEM NUMBER:
SERIAL NUMBER: _____________
TM
WARNING
1
M268175D
268175
Advertisement
Table of Contents
Related Manuals for North Star M268175D
Summary of Contents for North Star M268175D
- Page 1 EXERCISE CAUTION in vehicle handling when towing sprayer to avoid loss of control or rollover. Improper use of the trailer kit could result in serious injury to the operator or nearby persons. Any Questions, Comments, Problems, or Parts Orders Call NorthStar Product Support 1-800-270-0810 M268175D ITEM NUMBER: SERIAL NUMBER: _____________ WARNING 268175...
- Page 2 Hazard Signal Word Definitions...
-
Page 3: Table Of Contents
Summary of Important Safety Information ...4 During Assembly During Operation During Storage / Troubleshooting Warning Label Location ...5 Unpacking Unpacking... Unpacking the Manual Bag ... Assembly Step One: Attach the A-frame tow bar to frame Step Two: Attach the jack to the A-frame tow bar Step Three Build the axle assembly Step Four: Attach axle assembly to the frame... -
Page 4: Summary Of Important Safety Information
Summary of Important Safety Information Read and understand this owner’s manual completely before using the trailer kit. Improper use of the trailer kit could result in serious injury for the operator or nearby persons. LISTED BELOW is a summary of safety information of particular importance. See individual sections of this owner’s manual for more details. -
Page 5: Warning Label Location
Warning Label Location Towing Hazard Serious injury or death can happen if towing safety rules are not followed. - When tank is full, tongue weight is 400 lbs. Make sure vehicle and towing equipment are properly rated. WARNING - When tank is empty, trailer is extremely light. Caution must be used when towing at higher speeds. -
Page 6: Unpacking
Closely inspect all contents in the shipping carton. • If you have damaged components: Contact the freight company that delivered the unit and file a claim. • If you have missing components: Contact NorthStar Product Support at 1-800-270-0810. Axle Support Qty 2 13”... -
Page 7: Unpacking The Manual Bag
Unpacking the Manual Bag The following items are found in the manual bag. Hitch Pin 3/8 x 1” Bolt 7/16 x 1-1/4” Bolt 5/8 x 1-1/2” Bolt 3/8 x 1-1/4” Bolt Qty. 8 Qty. 4 Qty. 10 Qty. 12 5/8” Class G Nut 3/8”... -
Page 8: Assembly
Step One: Attach the A-frame tow bar to frame. IMPORTANT: It is recommended that at least two people perform this step. 1. Raise the front of the sprayer frame until there is enough room for the A-frame tow bar to fit underneath. -
Page 9: Step Two: Attach The Jack To The A-Frame Tow Bar
Step Two: Attach the jack to the A-frame tow bar. 1. Attach the jack to the A-frame tow bar with (4) 7/16 x 1-1/4” bolts and (4) 7/16” nyloc nuts. 2. Tighten the bolts to 60 ft- lbs. 7/16” nyloc nut A-frame tow bar Step Three: Build the axle assembly. -
Page 10: Step Four: Attach Axle Assembly To The Frame
Step Four: Attach axle assembly to the frame. NOTE: For this step, the broadcast kit and taillight kit cannot be in place, if equipped. 1. Place the jack’s wheel on a 2x8 or other suitable block to gain 1-1/2” of additional height. Completely extend the jack to raise the front of the sprayer frame. -
Page 11: Step Five: Attach The Wheels
Step Five: Attach the wheels. NOTE: For this step, the engine must be free of oil and gas. The broadcast kit and taillight kit cannot be in place, if equipped. IMPORTANT: At least two people should perform this step. 1. Place a piece of cardboard on the ground behind the sprayer. The ground should be a hard, level surface. -
Page 12: Machine Components
1. Hitch Pin: Allows the trailer unit to be hooked up to an agricultural style coupler. 2. Jack: Supports the trailer when it is not in use. Eases moving and connecting the trailer to a tow vehicle. 3. Tongue: The tongue connects the sprayer frame to the tow vehicle. 4. -
Page 13: Operation - Important Safety Information
Operation – Important Safety Information Now that you have completed and tested your assembly, there is some important safety information you need to know with regard to vehicle handling with the sprayer attached. Carefully read and make sure you understand the following safety information before using the trailer kit. •... -
Page 14: Operation - Using The Trailer Kit
Operation – Using the Trailer Kit Step One. Inspect/Repair If the trailer has been used previously, it must be prepared BEFORE EACH SUBSEQUENT USE. Read instructions below carefully for inspecting and preparing the trailer kit. Damaged or missing components could result in injury to the operator, bystanders, or property damage. Important safety rules: •... -
Page 15: Specifications And Accessories
Specifications and Accessories Trailer Kit Specifications Maximum Towing Speed……………12 MPH Tire Size…………………………….. ST175/80 D13 Maximum Tire Pressure……………..35 PSI Overall Dimensions (boxed)…….….. 53”L x 45”W x 15”H Weight (shipping)…………………... 250 lbs. Available Accessories High Speed Trailer Upgrade Kit…… Item #268176 The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. -
Page 16: Parts Breakdown
Exploded View – 268175 – Rev. D Item Part# Description 1178 Hitch Pin 779240 A-Frame Towbar 30312 Bridge Pin 779188 Jack 779094 Axle Support 779245 Axle Gusset 124223 Left Torsion Axle 124220 Right Torsion Axle Item Part# Description 124293 Grease Seal 124292 Bearing 124112...