Advertisement
Assemble Axle, Tongue Coupler,
•
Fenders.
Lay Trailer Frame flat upside down on a
table.
Align the holes in the Fenders with the
Fender Bolt Holes on the Trailer Frame.
They are located alongside the Axle
Fender
Channels. Using two Bolts and Lock
Washers on each Fender, attach and
Leaf Spring
tighten both Fenders.
Install Axle Assembly into Axle
Channels. The Eye in the Springs should
point toward the front of the tailer.
Install four Bolts and four Nuts in the
Frame member to secure the Axle.
Tighten nuts to where Cotter Pins can be
slipped through the holes in the Bolts
and then bend at least one leg of the
Cotter Pin.
Eye
Fender
Bolt hole
Bolt Trailer Tongue to trailer using the
longest two Bolts as shown. Tighten
Nuts to where Cotter Pins can be
inserted through holes in Bolts and then
bend at least one leg of the Cotter Pin.
Advertisement
