Fan Tray And Speed Variation; Power Options - Extreme Networks ExtremeSwitching SLX 9150 Hardware Installation Manual

Fan Tray and Speed Variation

Fan Tray and Speed Variation
Fan speeds are adjusted based on calculations of the temperatures on all sensors. Due to one fan being
located behind the other, air pushed from one fan may cause the other fan in the module to run at a
higher speed. One fan can run at medium speed while the other can spin at high speed if one is close to
the temperature boundary.
Table 29: Fan Tray and Speed Variation
Description
Tray 1 Fan 1
Tray 1 Fan 2
Tray 2 Fan 1
Tray 2 Fan 2
Tray 3 Fan 1
Tray 3 Fan 2
Tray 4 Fan 1
Tray 4 Fan 2
Tray 5 Fan 1
Tray 5 Fan 2
Tray 6 Fan 1
Tray 6 Fan 2
* - The color of the tab on the fan tray indicates the airflow direction:
•
Red = Front-to-Back
•
Blue = Back-to-Front

Power Options

Table 30: SLX 9150 Power Options
SLX 9150
76 ExtremeSwitching SLX 9150 Hardware Installation Guide
ExtremeSwitching SLX 9150 Technical Specifications
Operation Status
up
up
up
up
up
up
up
up
up
up
up
up
750 W AC power supply:
Part # XN-ACPWR-750W-F (front-to-back)
Part # XN-ACPWR-750W-R (back-to-front)
AC Input: 100-120/200-240 VAC, 50/60 Hz
3.5/1.8 A max. for each PSU
PSU Input Socket: IEC 320 C14
Power cord input plug: IEC 320 C13
750 W DC power supply:
Part # XN-DCPWR-750W-F (front-to-back)
Part # XN-DCPWR-750W-R (back-to-front)
DC Input: -54 VDC, 7.0 A max. for each PSU
Operation Speed
high speed
medium speed
high speed
medium speed
high speed
medium speed
high speed
medium speed
high speed
medium speed
high speed
medium speed
Airflow Direction
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*
Unknown*