Elation CUEPIX BLINDER WW2 User Manual page 13

MAIN MENU
CHANNEL CH:
DMX MODE ADDR:
SECONDARY MODE:
DIMMER C1:
DIMMER C2:
DIMMER F:
FLIP
DimCurve
FLIP SETTING
Select the desired starting COB module and chase direction from one of the following modes
below via UP/DOWN buttons, and then press ENTER to confirm.
1
Features subject to change without notice
OPTIONS / VALUES
01, 02, 03, 04
001 - 512
00-99
0-99
00-99
OFF = 1,2 ON = 2,1
Standard, Stage, TV,
Architectural, Theatre, Default
2
SYSTEM MENU
Set desired DMX Channel Mode
DMX Address Setting
Set unit to Secondary Mode
Set manual Dimming value for COB Module 1
*Control of COB Module 1 depends on the Flip setting
Set manual Dimming value for COB Module 2
*Control of COB Module 2 depends on the Flip setting
Set manual Flash / Strobe value for COB Module 1
Set chase direction between COB Modules 1 and 2
Set desired Dimming Curve
13
DESCRIPTION
2
1