Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elation WW PROFILE
Summary of Contents for Elation WW PROFILE
- Page 1 WW PROFILE™ user manual ...
- Page 2 Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040 323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com Elation Professional B.V.
-
Page 3: Table Of Contents
C O N T E N T S General Information Warranty Safety Instructions General Guidelines Fixture Overview Lens and Gobo Holder Installation Fixture Installation Understanding DMX Fixture Menu DMX Channel Functions And Values Cleaning and Maintenance Technical Specifications Optional Accessories WW PROFILE™ User Manual Version 1... -
Page 4: General Information
Please do not discard the shipping carton in the trash. Please recycle whenever possible. BOX CONTENTS (1) 3pin DMX Cable (1) powerCON Cable (1) Safety Cable Manual & Warranty Card WW PROFILE™ User Manual Version 1... - Page 5 You may also visit us on the web at www.elationlighting.com any comments or suggestions. For service related issue please contact Elation Professional®. ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST...
-
Page 6: Warranty
No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof. -
Page 7: Safety Instructions
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating. WW PROFILE™ User Manual Version 1... -
Page 8: General Guidelines
Use the original packaging and materials to transport the fixture in for service. DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving. WW PROFILE™ User Manual Version 1... -
Page 9: Fixture Overview
UP Button 5pin DMX IN DOWN Button powerCON IN MODE/ESC Button powerCON OUT ENTER Button Mounting Yoke LCD Menu Control Display BLADE SHUTTERS FUSE ROTATION 3pin DMX IN Gobo Slot* *Gobo and Holder not included WW PROFILE™ User Manual Version 1... -
Page 10: Lens And Gobo Holder Installation
L E N S A N D G O B O H O L D E R I N S T A L L A T I O N Gobo Holder (not included) Supports “B” Size Metal and HT Transparency Gobos (not included) WW PROFILE™ User Manual Version 1... -
Page 11: Fixture Installation
10 times the weight of the fixture. (210 lbs / 95 kg) Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable. Never stand directly below the device when mounting, removing or servicing. WW PROFILE™ User Manual Version 1... - Page 12 S A F E T Y C A B L E Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails. WW PROFILE™ User Manual Version 1...
- Page 13 The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. WW PROFILE™ User Manual Version 1...
-
Page 14: Understanding Dmx
DMX cable rated at 120 ohms; this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers. Your cables should be made with a male and female XLR connector on either end of the cable. - Page 15 DMX cable with XLR input and output connectors. Always be sure daisy chain your in and out data connections, never split or “Y” your DMX connections unless you are using an approved DMX splitter such as Elation’s Opto Branch 4™, Opto Branch 8™, or DMX-Branch/4™.
- Page 16 5pin XLR fixtures may be implemented in a 3pin XLR DMX line. When inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The following chart details a proper cable conversion. WW PROFILE™ User Manual Version 1...
- Page 17 DMX input jack of the fixture. The DMX controller is switched off or defective. The DMX cable or connector is defective. A DMX terminator has been inserted into the last fixture in your DMX chain. WW PROFILE™ User Manual Version 1...
-
Page 18: Fixture Menu
DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting. You may exit the main menu at any time without making any adjustments by pressing the MODE/ESC button. WW PROFILE™ User Manual Version 1... - Page 19 InByOut = Manual Scenes Edit Scene 250 Time=xx.xs RecCntrl XX~XX Automatic Scenes Recorder FuncMode - Address Define desired DMX address via the Control Panel. FuncMode - ValuDisp Display DMX 512 value of each channel. WW PROFILE™ User Manual Version 1...
- Page 20 Clear fixture last run time. Time can only be cleared after the timer password is entered. Info - TempInfo - HeadTemp Displays temperature of the fixture. Info - Soft Ver Displays software version of the fixture. WW PROFILE™ User Manual Version 1...
- Page 21 To unlock, keep MODE/ESC button pressed for 3 seconds. Persnal – Temp C/F Define how fixture displays internal temperature (Celsius or Fahrenheit). Persnal – ResetDef When ON, all factory settings are restored. ManCntrl – ManCntrl Adjust functions manually. WW PROFILE™ User Manual Version 1...
- Page 22 DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will automatically be transmitted to the moving head. WW PROFILE™ User Manual Version 1...
- Page 23 MODE/ESC in order to return to the main menu. 2. Automatic Program Run “FuncMode”. ENTER to confirm. “AutoProg”. ENTER to confirm. elect “Master” or “Alone”. ENTER to confirm. MODE/ESC in order to return to the main menu. WW PROFILE™ User Manual Version 1...
- Page 24 MODE/ESC in order to return to the main menu. 5. Automatic Scene Recording “EditProg”. ENTER to confirm. “EditScen”. desired scene numbers. A maximum of 250 scenes can be programmed. ENTER to confirm. MODE/ESC in order to return to the main menu. WW PROFILE™ User Manual Version 1...
- Page 25 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: WW PROFILE™ User Manual Version 1...
-
Page 26: Dmx Channel Functions And Values
Pulse Effect In Sequences 160-191 LED ON 192-223 Random Strobe Effect SLOW to FAST 224-255 LED ON DIMMING CURVES 0-20 STANDARD 21-40 STAGE 41-60 61-80 ARCHITECTURAL 81-100 THEATRE 101-255 Default to Unit Dimming Curve Setting WW PROFILE™ User Manual Version 1... -
Page 27: Cleaning And Maintenance
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer. -
Page 28: Technical Specifications
14° to 113°F (-10° to 45°C) APPROVALS / RATINGS CE | cETLus | IP20 Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. WW PROFILE™ User Manual Version 1... -
Page 29: Photometric Data
. e l a t i o n l i g h t i n g . c o m PHOTOMETRIC DATA Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. WW PROFILE™ User Manual Version 1... -
Page 30: Dimensional Drawings
. e l a t i o n l i g h t i n g . c o m DIMENSIONAL DRAWINGS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. WW PROFILE™ User Manual Version 1... -
Page 31: Optional Accessories
Profile High Definition Lens 36° PHD350 Profile High Definition Lens 50° PLC3 3' (1m) powerCON PRO Link Cable AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable Additional Cable Lengths Available WW PROFILE™ User Manual Version 1...