Elation CUEPIX BLINDER WW2 User Manual page 11

CLAMP MOUNTING
Center Rigging Hole
The fixture provides an integrated yoke/rigging
bracket. When mounting this fixture to truss be sure
to secure an appropriately rated clamps to the yoke/
rigging bracket using a M10 screw fitted through
the center hole.
SECURING
Regardless of the rigging option you choose for your
fixture always be sure to secure your fixture with a
safety cable. The fixture provides a built-in rigging
point for a safety cable on the base of the unit as
illustrated below. Be sure to only use this designated
rigging point to attach the safety cable.
Safety Cable Rigging Point
SAFETY CABLE
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS
FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE
WILL NOT DROP IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury. Fixture is fully operational in the
specific mounting positions illustrated.
11