Main Menu Boilers (1 - Siemens Synco 700 Operating Instructions Manual

Main menu boilers (1...6)

(1...6: Several boilers only with RMK770)
Menu Flue gas measuring mode
Refer to page Fehler! Textmarke nicht definiert..
Menu Boiler operating mode
RMH760B:
Preselection:
• Auto = automatic plant op-
eration (normal situation)
• Release DHW = boilers will
only be released for DHW
heating
• Off = boiler off; frost protec-
tion is ensured
State:
• Enabled = heat generation on
• Off = heat generation off
Cause: Here, the reason for the boiler's state is given
Building Technologies / HVAC Products
RMK770:
Preselection:
• On = boiler released
• Off = boiler locked;
frost protection is
ensured
State:
• On = boiler released
• Off = boiler locked
Menu Inputs / setpoints
Displayed are the values acquired by the inputs and the
associated setpoints and limit values. In addition, the
hours run counter and the burner start counter can be
read.
Menu Outputs
Displayed are for each output the state and thus the
operating state (on / off, open / closed) of the controlled
plant component. If a plant component is not present,
there will be no menu item either.
Menu Limitations
The current state of the limitations (Active/Inactive) is
displayed (useful information for the heating engineer).
Path: Main menu > Boiler ...
CE1B3133x2-en 74 319 0560 0 a
31
10.10.2006