Cleaning The Condenser - Bosch WTG86403UC Use And Care Manual / Installation Instructions

Determing the Problem
Problem
Dryer does not start.
Start/Pause indicator
light does not flash.
The display panel and
indicator lights go out,
Start/Pause indicator
light flashes.
The display panel and
Start/Pause indicator
switch off.
Dryer does not start.
Start/Pause indicator-
flashes.
é indicator light up.
DR indicator light up.
Water has not drained
completely.
Water is leaking out.
Program terminates
shortly after starting.
The door opens by
itself.
Possible cause(s)
Power cord end not inserted at all
or not inserted correctly.
A fuse is blown or breaker is
tripped.
Door not closed properly.
Program not selected.
Energy-saving mode is activated.
Sleep mode after setting the Finish
in option is activated.
Start/Pause button not pressed.
Lint filter dirty.
Condenser dirty.
Drain hose is blocked.
Dryer is not leveled.
The Condenser seal is dirty.
Drain hose is leaking.
Laundry is not loaded.
Load too small for selected pro-
gram.
Loaded laundry is too dry.
The door not closed properly.
Solution(s)
Insert power cord end correctly.
Replace fuse or reset breaker.
For replacing the fuses in the supplied Power
Adapter.~ Replacing fuses in the Power Adapter -
step-by-step; Page 33
Check if laundry is caught in the door. Close the door
until a click is heard.
Rotate the program selector to desired program.
~ Program selection table; Page 28
Touch any button to activate the display.
~ Environmentally friendly use of your dryer; Page 8
Touch any button to activate the display.
Press the Start/Pause button to start the cycle.
Clean lint filter.
~ Cleaning the lint filter; Page 30
Touch the Start/Pause button to reset the displayed
indication and then touch Start/Pause button again to
reset the appliance if necessary.
Clean Condenser.
~ Cleaning the Condenser; Page 32
Touch the Start/Pause button to reset the displayed
indication and then touch Start/Pause button again to
reset the appliance if necessary.
Check drain hose.
~ Maintenance of drain hose; Page 33
Check drain hose connection conditions.
Level the dryer.
~ Leveling the dryer; Page 18
Clean the Condenser seal.
~ Cleaning the Condenser; Page 32
Check entire length of drain hose for leaks; replace if
necessary.
Check that hose is clamped on hose barb at back of
the dryer securely.
Load the laundry.
~ Loading the laundry; Page 24
Use time program.
~ Program selection; Page 23
~ Program selection table; Page 28
Check the loaded laundry. If it is dry, open the door,
remove laundry and turn program selector to Off.
Close the door until a click is heard.
35