Electrical Connections - Bosch WTG86403UC Use And Care Manual / Installation Instructions

NOTICES
Examples shown are for reference only. Not all fittings,
▯
connectors, nuts, brackets, ties, etc. are supplied to
accommodate every application.
Ensure there are no kinks or crimps along the entire
▯
length of hose.
If installed in an upper floor of a multi-story building,
▯
the dryer should be installed on a drained floor to
prevent water damage to lower floors in the event of a
leak.

Electrical Connections

Power Cord
The attached power cord is a standard NEMA 6-15P
cord and is UL approved and listed in the USA and
Canada. It meets the following requirements:
208-240 volt rated;
▯
15 amps.
▯
NOTICES
This appliance is restricted to being powered by the
▯
supplied power cord noted above.
There are two allowable methods to connect the
▯
appliance cord to power:
If the home has an existing 4-prong, 30A Dryer
1.
receptacle use the supplied Power Adapter.
Plug the adapter into the 4-prong receptacle (Line
side) and then plug the Bosch Dryer and Washer
power cords into the adapter (Load side). See
following images of Power Adapter for Line/Load side
locations and appliance cord placement.
NOTICE:
This adapter can only be used with a 4-prong
receptacle. If the home has an existing 3-prong dryer
receptacle it and its complete branch circuit must be
changed to a 4-prong circuit.
16
Use an existing individual 240V, 15A minimum branch
2.
circuit having a NEMA 6-15R outlet (or choose to have
one installed).
WARNING
9
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK.
Do not reuse this Power Adapter with a new
purchase of a Dryer. The old Power Adapter must
be discarded with the old Dryer. A new Power
Adapter must be used when a new Dryer is
installed.