Loading The Laundry; Starting The Program - Bosch WTG86403UC Use And Care Manual / Installation Instructions

Loading the laundry

WARNING
9
RISK OF EXPLOSION
Do not dry laundry that has ever been in contact
with solvents, oil, wax, grease or paint (e.g. nail
varnish remover, stain remover, cleaning solvent,
etc.).
Check lint filter.
1.
The filter should be cleaned after or before every
drying process. Cleaning the filter reduces the drying
time and saves energy.
~ Cleaning the lint filter; Page 30
Load the laundry into the drum and close the door.
2.
Tip: If the door has not been closed properly, the dryer
will not start.
Tips
After loading, close the door carefully so as not to trap
any items between the door and the rubber seal. The
door should close until a click is heard.
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Recommended Load Size
Recommended maximum load size can be found in the
program selection table in this manual.
~ Program selection table; Page 28
24
Load the laundry
Place laundry in the empty drum. Put each piece of
laundry into machine separately.
For best results the laundry should be sorted according
to type of laundry and desired degree of drying.
~ Sorting the laundry; Page 27
~ Program selection table; Page 28
~ Dry Level; Page 29

Starting the program

Rotate program selector to the desired program.
1.
Select the program which corresponds to the laundry
in the dryer from Program selection table.
~ Program selection table; Page 28
The Start/Pause indicator light starts flashing.
Touch the Start/Pause button. Indicator lamp lights up
2.
and the cycle starts.
During the cycle, the display area indicates the
estimated remaining time and symbols showing the
cycle progress are lit.~ Display area; Page 20
NOTICES
If you want to protect the cycle against inadvertent
▯
adjustment, select the Childproof lock.
~ Childproof lock; Page 25
If indicator lights up, clean the lint filter and/or
é
▯
Condenser.
~ Cleaning the lint filter; Page 30
~ Cleaning the Condenser; Page 32
If DR indicator lights up, check the drain hose and
▯
its connection.
~ Cleaning the Condenser; Page 32