JVC KW-V40BT Instruction Manual page 32

BLUETOOTH BLUETOOTH
Connecting/disconnecting a registered
Bluetooth device
1
Display the <Bluetooth Setup> screen.
(Page 31)
2
To connect:
Select [Connect] next to the target device
to display the <Connect Device> screen
(1), and then select the device you want
to connect (2).
"Connected" appears. Press [OK] to confirm the
operation.
• All registered devices (mobile phone and
audio player) are listed on <Connect Device>.
– Selectable items depend on the device you
are operating.
32
To disconnect
Select [Disconnect] next to the target
device.
A confirmation message appears. Press [Yes].
Deleting a registered Bluetooth device
1
Display the <Bluetooth Setup> screen.
(Page 31)
2
Select [Connect] next to the target device
to display the <Connect Device> screen
(1), then display the <Delete Device>
screen (2).
3
Select a device to delete.
A confirmation message appears. Press [Yes].
Using the Bluetooth mobile phone
Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• The device status/battery capacity is displayed
when the information is acquired from the device.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 28 )
To reject a call
When <Auto Answer > is set to [On] (Page 37)
The unit answers the incoming call automatically.
Ending a call
While talking...