Advertisement
Initial Setup:
1.
2. Unravel and straighten the cord before use.
3. Remove the Water Tank from the Base. (Figure 1)
4. Turn the Water Tank upside down and twist the Water Tank
Cap counter-clockwise to remove. (Figure 2)
5. Fill the unit with clean, cool tap water.
Warning:
6. Place the Water Tank Cap back on the Water Tank and turn
it clockwise until secure.
7. Place the Water Tank back into the Base, making sure it is
seated securely.
Note: Failure to ensure the Water Tank is seated correctly
could cause the unit to leak water.
8.
Operation:
elevated non-metallic lint free, waterproof, level surface for
best performance. This is to help disperse the mist in the air,
and prevent it from being knocked over or cause moisture
damage to surface.
surface. The air vent on the bottom may become blocked,
1. To turn the humidifier on, turn the humidity adjustment knob
clockwise until you feel the knob click. At this time the indicator
light in base will turn on, the unit should be on and you can
adjust the amount of mist the unit outputs by continuing to turn
the knob clockwise. To turn the unit off, turn the humidity
adjustment knob counterclockwise until it clicks. (Figure 3)
the water tank.
2. When the unit is out of water, the indicator light in the
base will change to red. Please turn the unit off and remove
the water tank to refill it.
base, the indicator light will change to green. (Figure 5)
4
Using Your Humidifier
20304-01
R20150420
Spout
Water
Tank
Figure 1
Figure 2
Humidity Adjustment Knob
Figure 3
Spout
Water
Tank
Base
Figure 4
Advertisement
