Table of Contents
Advertisement
2/3-thread converter
2-thread flatlock
2-thread wrapped overlock
B
C
D
23
How to use the 2/3 thread converter:
* This attachment enable the 1-needle type machine to perform
overedging or decorative-stitching for 1-ply fabric. It enables the
2-needle type machine to perform 3-thread super stretch stitch-
ing.
(1) Remove the upper looper thread, and insert the 2/3 thread con-
verter (separately available) into the top section (A) of the upper
looper shaft and fit wire (B) into the hole in the upper looper.
Upper looper (C) : Press the springy wire backward until its top
A
(2) To thread the machine head, pass the lower looper thread above
the wire of the 2/3 thread converter and route it down under the
presser foot.
Be sure to turn the power switch OFF.
end fits in the hole in the upper looper.
(D) : If the wireis not sufficiently springy or it can-
not be fitted in the hole in the upper looper
smoothly, adjust the curved section of the wire.
MO-654DEN
Hide quick links:
Advertisement
Table of Contents
