AT&T Merlin Legend MLX-10D User Manual page 65

Using and Programming Features
To find a feature name on the display, press Menu, select
Ext Program [Prog] and Start. Then press the line
button you want to program and select
ListFeature [List]. The feature list appears on the
display.
You can press More to advance screen-by-screen through
the features. Or you can use FindFeature [Find], located
on the first screen listing feature names, to select the first
letter of the feature name from an alphabetical range of letters
on the display. FindFeature
feature names that begin with
selected.
Before you begin programming, remove the clear plastic that
covers the button labeling card and write in the name of the
features next to the buttons to be programmed. Replace
cover with the textured side up.
1. Press Menu to begin programming.
2 .
Select Ext Program [Prog].
On phones with small display, press More first.
You hear a tone approximately every 20 seconds to signal that you
are in programing mode.
3. Select Start .
4. Press the button you labeled.
5 .
Select ListFeature [List].
The screen lists features.
[Find] finds the screen with
the range of letters you
Programming Features
3-9