Alarm Clock - AT&T Merlin Legend BIS22D Quick Reference

OFTEN USED FEATURES
P a g i n g
To program speakerphone paging
button:
1.
Label a button as Group Page
(name) or Page All.
Slide T/P switch to P.
2 .
3 .
Press labeled button.
4 .
Dial *22 and Group Page or
Page All extension.
5.
Slide T/P switch to center.
To use speakerphone paging:
1 .
Press any ICOM Ring or SA
Ring button.
2 .
Lift handset or use headset,
3 .
Press programmed button or
dial company-provided Group
Page or Page All number.
4 .
Announce call after beep.
To use loudspeaker paging:
1. Lift handset or use headset.
2.
Press programmed button, or
press Feature and dial 9 and
Loudspeaker Page line
number.
Dial code for zone to be
3.
paged.
Announce call.
4.
P a r k
To program button:
See Programming Buttons.
To program a park button for a
specific Park Zone:
1 .
Label button Park (zone).
Slide T/P switch to P.
2 .
3 .
Press labeled button.
Dial *22 and Park Zone
4 .
extension.
5 .
Slide T/P switch to center.
To use park and paging:
1. Park the call.
At your extension:
Press programmed Park
button.
Press Transfer, dial your
extension, and press
Transfer again.
At a park zone:
Press programmed Park
(zone) button.
Press Transfer, dial Park
Zone extension, and press
Transfer again.
2.
Setup page.
For Speakerphone Page:
Press programmed Group
Page - (name) or Page All
button.
Dial Group Page or Page
All number.
For Loudspeaker Page:
Press programmed
Loudspeaker Page button.
Press Feature and dial 9
and line number (801-880)
and code for the Page
Zone, if necessary.
3.
Announce call and extension
where call is parked.

Alarm Clock

To set alarm clock:
For BIS-22D and BIS-34D
C o n s o l e s :
Press Set until alarm
1 .
appears on display.
Press Fwd to set O n .
2 .
P r e s s S e t .
3 .
Press Fwd or Rev to set the
4 .
h o u r .
5 . P r e s s S e t .
6 . Press Fwd or Rev to set the
m i n u t e s .
Press S e t
7 .
8 .
Press Exit.
For MERLIN II System Display
C o n s o l e s :
Press Clock Functions
1 .
button.
2 .
Select Alarm.
3 .
Select Alrm Set.
4 .
Press Hour and Min
arrow keys.
Select Exit.
5 .
Select Alrm On.
6 .
Select Exit.
7 .
8 .
Press Clock Functions
button.
To cancel alarm clock:
For BIS-22D and BIS-34D
Consoles:
Press Set.
1.
2.
Press Fwd.
3.
Press Exit.
For MERLIN II System Display
Consoles:
1.
Press Clock Functions
button.
2. Select Alrm Off.
3.
Select Exit.
Press Clock Functions.
4.