Using Features - Avaya ETR How To Use Manual

Using Features

USE A
FEATURE • Press the programmed button;
CODE
PROGRAM
A FEATURE
BUTTON 1 Label the button.
2 Press
3 Press the appropriate button.
4 Dial the programming code (see the
5 To program another button, repeat
To use a feature:
Feature
or press
feature code (see the following
pages) .
Features that dial numbers
automatically may need special
characters to allow for correct dialing
or system response.
Hold
• Inserts 1-5 sec. pause in dial
sequence. Multiple consecutive pauses
allowed. P displays.
Conf
• Sends switchhook flash. Must
be first entry in sequence. F displays.
#
• Used to signal end of dialing
sequence or to separate grouped digits.
# displays.
To program features, extensions
and phone numbers:
Feature 0 0
following pages). If additional
numbers such as extensions are
needed, dial them too.
steps 1, 3, and 4; or exit by pressing
Feature 0 0
and then the
.
.