Table of Contents
Advertisement
Starting at the top left of Figure 1 and continuing clockwise:
A red light which goes on steadily when a message has
Message Light
been left for you.
For disconnecting from a call or dropping the last
Drop/Test Button
, you can
party added to a conference call. When used with
Select
perform a self-test of your voice terminal lights and tone ringer.
For setting up conference calls. With a
Conference/Ring Button
DEFINITY Generic 1 or Generic 3, the conference can include up to six
parties. DEFINITY Generic 2 users can conference up to three parties.
(To add more parties, DEFINITY Generic 2 users should see their
, you can select a
system manager.) When used with
Select
personalized ringing pattern for your voice terminal.
A red button for putting calls on hold.
Hold Button
For transferring a call to another voice terminal.
Transfer Button
A built-in supertwist LCD 2-line by 40-character display.
Display
These six buttons are devoted to
6 Call Appearance/Feature Buttons
handling incoming and outgoing calls (call appearances) and are
labeled with an extension number. Each button has a red appearance
light beside it to tell you that this is the line you are using or that this is
the line you will get when you answer a call. The green status light next
to each call appearance and feature button tells you the line or feature is
being used.
Each of these 15 buttons accesses a feature and is
15 Feature Buttons
labeled with a feature name. Each button has a green light beside it.
When the green light goes on, the feature is active.
Use in ACD operation to end a call. However, pressing
Release Button
is equivalent to hanging up; you will not receive dial tone.
Release
This jack is used for connecting
Line Jack (on bottom of voice terminal)
a line cord to your voice terminal. The jack is labeled ''LINE.''
Use this button to automatically log in to the ACD system
Log in Button
when you want to begin answering ACD calls.
5
Advertisement
Table of Contents
