Table of Contents
Advertisement
Field
Duplex Mode
Expansion CS
Expansion Description
Expansion Type
Fault Messages
Filtering Mode
Flow Control Mode
IEEE-802.1D STP Mode
IP Address
Cajun P120 Manager User Guide
Description
The state of communication of the selected port,
ports, or ports on the selected LAG. Possible values
are:
• Full Duplex - The port can send and receive
simultaneously.
• Half Duplex - The port can either receive or
send, but can not do both simultaneously.
The version of the expansion module. The version
is updated whenever there is a functional
modification to the module.
A description of the expansion module in the
selected module.
The type of expansion module in the selected
module.
A list of fault messages.
The mode of operation of the IP Multicast Filtering
on the device. Possible Modes are:
• Enable - IP Multicast Filtering is enabled on
the device.
• Disable - IP Multicast Filtering in not enabled
on the device.
The state of flow control on the selected port, ports,
or ports on the selected LAG.
The state of Spanning Tree Protocol. Possible states
are:
• Disable - STP is disabled. This is the default
state.
• Enable - STP is enabled.
When activating STP, keep in mind that:
• All bridges should run STP.
• Redundancy applications and STP cannot co-
exist.
For more information refer to Spanning Tree
Algorithm (STA) in The Reference Guide.
The IP address of the device, manager, agent, or
neighbor device.
Configuration Fields
54
Advertisement
Table of Contents
