HELIX M FOUR DSP Manual page 33

Connection to a PC
It is possible to freely configure the HELIX
M FOUR DSP with our DSP PC-Tool software.
The user interface is designed for easy handling
of all functions and allows an individual adjustment
of each of the ten DSP channels. Prior to connect-
ing the amplifier to your PC visit our website and
download the latest version of the DSP PC-Tool
software.
Check from time to time for software updates. You
will find the software and the respective user manu-
al on www.audiotec-fischer.com.
We strongly recommend to carefully read the user
manual (Sound Tuning Magazine) before using the
software for the first time in order to avoid any com-
plications and failures.
Important: Make sure that the amplifier is not con-
nected to your computer before the software and
USB driver are installed!
In the following the most important steps how to
connect and the first start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www.audiotec-fischer.com) and install it on
your computer.
2. Connect the amplifier to your computer us-
ing the USB cable that is included in delivery.
If you have to bridge longer distances please
use an active USB extension cable with in-
tegrated repeater or the optionally available
WIFI CONTROL interface.
3. First turn on the amplifier and then start the
software. The operating software will be updat-
ed automatically to the latest version if it is not
up-to-date.
4. Now you are able to configure your HELIX
M FOUR DSP with our intuitive DSP PC-Tool
software. Nevertheless, interesting and useful
hints can be found e.g. in our "Sound Tuning
Magazine", which can be downloaded for free
from our website.
Caution: We highly recommend to set the vol-
ume of your car radio to minimum position during
first start-up. Additionally no devices should be
connected to the amplifier until general settings in
the DSP PC-Tool software have been made. Espe-
cially if the M FOUR DSP will be used in fully ac-
tive applications, a wrong setup can destroy your
speakers right away.
33