System Test; Ram Menu; C-Card Menu - AvMap GeoPilot Plus User Manual

Avmap geopilot plus: user manual

Table of Contents

Fig. 15.4.4 - About page

If it is necessary to return your GEOPILOT for repair, you must obtain a return authorization (RA)

number from C-MAP Aviation prior to shipping the system. Include with the GEOPILOT a description

of the problem, your RA number, and your name and address. If your return shipping address is

different, please include it. All packages are to be returned postage paid. As we are not responsible

for packages in transit, we recommend you purchase insurance and tracking information.

15.5 SYStEM tESt

If you have connected your GEOPILOT according to the instructions and chosen the proper menu

selections and are still having problems a RAM Clear will bring the system back to factory default

settings. Many times this will clear the errors and bring the GEOPILOT back to operating condition.

RAM CLEAR can be found in the System Test Menu.

Note

The additional tests in the System Test Menu are intended for factory testing. Faulty findings within these menus

is not necessarily a true result, as factory settings and equipment are often used during these tests.

Make sure the GEOPILOT is turned Off. While pressing and holding any other key, turn the

GEOPILOT On. A new menu will appear on the display. Use the cursor key to select the RAM

Menu and press 'ENT' to select RAM Test or RAM Clear.

• RAM Test

'ENT' on RAM Test to verify the integrity of the RAM. If the message "ERROR" appears the RAM is

physically damaged.

• RAM Clear

'ENT' on RAM Clear to to activate, press 'ENT' again to confirm (at this time if you do not wish to

clear RAM press 'ESC').

This operation will erase all Marks, Flight Plans, stored Track plots and destinations. It will also

return all selections (Input Data Format, selective display etc.) to original default values.

To check the Compact Flash and its connector.

• Compact Flash Test

Table of Contents