Table of Contents
Advertisement
connect.
In order to view additional data regarding the selected airway; in the Map mode, press the ENT
key once, select FULL INFO and press ENT again to confirm, select 'Enroute Airways' and confirm
pressing ENT.
Please Note: The Enroute Airways information displayed in the FULL INFO page may present two
options:
1. Outbound = 0 designates the ending leg of the airway
. Inbound = 0 designates the starting leg of the airway
In the GOTO menu you can find:
1. SELECt AIrWAY: by selecting this item, you will display the ENTER AIRWAY window. Using the
cursor key, you can edit the Low Airway name.
Note
Once you confirm the selection with the ENTER key, the airway is depicted in black.
. CLEAr AIrWAY: selecting this item and pressing the ENT key, the airway color will revert to the
original one.
Controlled Areas:
ON/OFF. The default setting is On.
restricted Areas:
ON/OFF. The default setting is On.
FIr and UIr:
ON/OFF. The default setting is Off.
MorA:
ON/OFF. The default setting is Off.
3.5.10.3 Land Settings
The Land Settings menu controls the level of cartographic detail shown.
roads:
ON/OFF. The default setting is On.
road Labels:
OFF/AMERICAN/EUROPEAN. The default setting is American.
railroads:
ON/OFF. The default setting is On.
City Names:
ON/OFF. The default setting is On.
rivers & Lakes:
ON/OFF. The default setting is On.
Cultural Features:
ON/OFF. The default setting is On.
Natural Features:
ON/OFF. The default setting is On.
Landmarks:
ON/OFF. The default setting is Off.
3.5.10.4 Marine Settings
Lights: ON/OFF/NO SECTOR. When Lights are On lights are shown on lighthouses and other lights
that rotate, a light sector is displayed to show the range of coverage for the light. In the No Sector
setting the light is shown without sector. The default setting is On.
Chart Boundaries: ON/OFF/AUTO. The default setting is On.
Bathymetric & Soundings: ON/OFF. The default setting is On.
Bathymetric & SND range: Sets the min/max value for Bathymetrics and Soundings. If the depth
unit is Meter (MT), the range is [0 - 15000], if Feet (FT) is [0 - 491], if Fathom (FM) is [0 - 80].
The default setting is [0, 33] FT.
Depth Area Limit: Sets a reference depth value (in the range [0 - 30000]). The Depth Areas shown
on the screen are filled with three different shades of blue. Selecting the Min and Max values
in the range of Depth Limit, there are three areas: [0, Min] colored with dark blue, [Min, Max]
colored in blue and [Max, 15000] colored in light blue. The default setting is 6 Ft for Depth Areas
Limit 1 and 50 Ft for Depth Areas Limit .
Navigational Aids: ON/OFF. The default setting is On.
Attention Areas: ON/OFF/CONTOUR. The default setting is Contour.
31
Advertisement
Table of Contents
