Playback Procedure - Toshiba VTD1431 Service Manual

PLAYBACK PROCEDURE

NOTES:
• If a non-compatible disc is loaded, "Incor-
rect Disc", "Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
20 and 36).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press (PLAY) or (OPEN/CLOSE)
on the unit, "Reading" will appear on the
display for approx. 30 seconds and then
"Incorrect Disc" will be displayed.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features may
not be available. Also refer to the instruc-
tions supplied with the DVDs.
22
5M20201A P20-25
5
6
22
1
Press (OPEN/CLOSE)
on the unit or OPEN/
CLOSE on the remote
control.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press PLAY.
The disc tray closes auto-
matically.
On the TV-screen, "
changes to "Reading" and
then playback commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
4
Press / or / to make a selection.
Press SELECT/ENTER.
• Title is selected and play commences.
Press STOP to end playback.
• The unit memorizes the stopped point, depending on the
disc. " " appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc ("
on the screen.), the unit will clear the stopped point.
7
To stop the playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press ON/STANDBY.
The disc tray closes automatically and unit turns off.
26/2/04, 12:06 PM
"
Reading
" appears