Related Manuals for Toshiba REGZA RV74 Series
Summary of Contents for Toshiba REGZA RV74 Series
- Page 1 RV74* Digital Series TV74* Digital Series XV74* Digital Series ZV74* Digital Series VL74* Digital Series YL74* Digital Series WL74* Digital Series...
-
Page 2: Table Of Contents
Contents Standby Channel Update ......25 DVB Character Set ........25 Dynamic Scan ......... 25 INSTALLING YOUR TV Location setting ........25 Difference List ..........4 Analogue switch-off ....... 25 Safety Precautions ........... 5 Installation and important information ....6 CONTROLS AND FEATURES The remote control .......... - Page 3 REGZA-LINK system standby ..... 71 No Signal Power Down ......58 REGZA-LINK system audio control ..... 71 Digital on-screen information and Programme Toshiba PC compatible with REGZA-LINK .. 71 Guide ............59 TEXT SERVICES Information ..........59 Guide ............. 60 Text services ..........
-
Page 4: Installing Your Tv
— ● ● ● Variable Audio Out — ● ● ● YouTube for TV — TOSHIBA Dual Band WLAN Adaptor Not supplied Not supplied Supplied Supplied WLM-10U2 with Gooseneck Cable Remote Control CT-90344 CT-90345 CT-90345 CT-90345 NOTE: The illustrations of the menu display in this manual show the WL743 as an example. -
Page 5: Safety Precautions
INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. This equipment has been designed and manufactured THE MAINS PLUG IS USED AS A DISCONNECTING to meet international safety standards, but like any DEVICE AND THEREFORE SHOULD BE READILY electrical equipment, care must be taken to obtain the OPERABLE. -
Page 6: Installation And Important Information
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product. -
Page 7: The Remote Control
INSTALLING YOUR TV The remote control 13 To display on-screen information (T/R/D) To access index page in Text mode (T) CT-90344 (for RV/TV series) 14 To return to previous menu (T/R/D) 15 Colour buttons: Text and interactive service control buttons (T) ROOT To display Root menu (R) CONTENTS To display Contents menu (R) -
Page 8: The Remote Control
INSTALLING YOUR TV The remote control 18 To exit menus To page up, down, left or right CT-90345 (for XV/ZV/VL/YL/WL series) 20 When using menus, the arrows move the cursor on the screen up, down, left or right. Press to confirm your selection 21 On-screen Menus 22 To return to previous Menu 23 Colour buttons: Text and interactive service control buttons... -
Page 9: Connecting Your Tv
CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. LAN port OPTICAL DIGITAL AUDIO OUTPUT ILLUSTRATION SHOWS THE WL MODEL. ®... -
Page 10: Connecting An Hdmi ® Or Dvi Device To The Hdmi Input
CONNECTING YOUR TV ® Connecting an HDMI or DVI To connect a DVI device device to the HDMI input Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ The HDMI input on your television receives digital HDMI 3 (AUDIO) socket (see illustration). -
Page 11: Regza-Link Connection
HDMI standard. • The HDMI 4 terminal is located at the side of the television. • This feature is limited to models incorporating Toshiba’s • This function is available when one PC and one AV amplifier REGZA-LINK. However, Toshiba is not liable for those are connected separately. -
Page 12: Connecting A Computer
CONNECTING YOUR TV Connecting a computer • When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the SETUP menu. With either an RGB/PC or an HDMI connection, you • If connecting a certain PC model with a unique PC signal, the can watch your computer’s display on the television PC signal may not be detected correctly. -
Page 13: Connecting A Home Network
To connect the TV to a home network with an internet connection - Wireless The LAN port allows your Toshiba TV to connect to Please refer to "Wireless Setup" section on page 38. your home network. You can use this revolutionary... -
Page 14: Controls And Input Connections
Energy efficiency cuts energy consumption and thus saves The USB 2 socket has to be used with the “TOSHIBA Dual Band money by reducing electricity bills. WLAN Adaptor WLM-10U2” in order to access a wireless NOTE: Putting the television into standby mode, will reduce network. -
Page 15: Setting Up Your Tv
SETTING UP YOUR TV Startup Application Press , and the TV Mounting screen will appear, press to select Stand or Wall. Before switching on the television, put your decoder and media recorder, if applicable, to Standby. TV Mounting If you are mounting the TV on a wall please select [Wall]. To set up the television, use the buttons on the [Stand] is recommended for other uses. - Page 16 SETTING UP YOUR TV You must allow the television to complete the search. If your satellite dish is movable, the following Positioning screen will appear. Auto Tuning Progress Found DTV Tune Positioning ATV Tune Waiting... Satellite : ASTRA 19.2°E Channel: C7 Transponder 1/83 (10743 MHz H) Go to 0...
-
Page 17: Ant/Cable/Satellite (If Available)
SETTING UP YOUR TV DTV End Frequency: Ant/Cable/Satellite (if available) This sets the frequency at which the scan will end. From this menu, you can set the RF input configuration. DTV Modulation: Press MENU, and select SETUP menu. You can choose from five QAM modulation settings. to highlight Ant/Cable/Satellite and use DTV Symbol Rate: to select Antenna, Cable or Satellite. - Page 18 SETTING UP YOUR TV To delete a satellite: Press to highlight a new line. In the Satellite Settings menu, press Transponder Settings highlight the satellite you want to delete. Frequency Polarisation Symbol Rate S/S2 12640 22000 Press the RED button. A confirmation window will 12662 22000 appear.
-
Page 19: Auto Tuning
SETTING UP YOUR TV To select the Dish Settings: Press MENU and use to select SETUP menu. to highlight Auto Tuning. Press In the Satellite Settings menu, press highlight the required satellite line, and then press SETUP Menu Language English Press to highlight Dish, and then press the GREEN button. -
Page 20: Atv Manual Tuning
SETTING UP YOUR TV ATV Manual Tuning For Satellite Tuning: A screen will appear warning that previous programmes and settings will be deleted. Tuning Auto Tuning The television can be tuned-in manually using ATV Manual Previous settings will be lost! Press EXIT for no Tuning. -
Page 21: Skip
SETTING UP YOUR TV Press MENU and use to select the SETUP Each signal will show on the television. If it is not your menu. Press to highlight ATV Manual Tuning and media recorder, press again to restart the press to select. -
Page 22: Sorting Positions
SETTING UP YOUR TV DTV Manual Tuning Press to select Skip. NOTE: The content of this menu varies depending on the DTV to turn Skip on. input (Antenna, Cable, or Satellite) that is currently selected. Press on the screen indicates a skipped position. Manual Tuning ATV Manual Tuning This feature is available for service engineers or can be... -
Page 23: Manual Tuning For Dvb-C
SETTING UP YOUR TV DTV Settings Manual Tuning for DVB-C When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Channels (Antenna/Cable) Frequency – input a specific frequency to be scanned The channel order may be changed to suit your personal Modulation –... -
Page 24: Channels (Satellite)
SETTING UP YOUR TV Move — Press the GREEN button to activate the Channels (Satellite) Move feature. Use the buttons to select the channel you wish to move and press to check. Select DTV Settings from the SETUP menu and press If you wish to move multiple channels at once, select another channel and check in the same way. -
Page 25: Standby Channel Update
SETTING UP YOUR TV Group — Press C or to select All or By Satellite. Dynamic Scan Sorting Type — Press C or to set the sorting type. If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message A - Z Station name order (A to Z) “Broadcast information has changed. -
Page 26: General Controls
CONTROLS AND FEATURES General controls Selecting positions To select a position, use the numbered buttons on the remote control. Quick Menu Positions can also be selected using P and P Quick Menu helps you access some options quickly, such as To display on-screen information such as position, input mode Picture Mode, Picture Size, More Information, Sleep or stereo/mono signal, press... -
Page 27: Sound Controls
CONTROLS AND FEATURES Sound controls Sound Navi (XV/ZV/VL/YL/WL series only) You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of Volume controls and mute sound the TV (Stand or Wall) and adjust the equalizer on-screen as desired. -
Page 28: Surround Settings
CONTROLS AND FEATURES Surround Settings Dynamic Range Control Surround or Stereo Extension, Voice Enhancement, and This feature allows control of audio compression for some Dynamic Bass Boost help to create an enhanced surround digital TV programmes (MPEG-1 and MPEG-2 audio sound experience with deep, rich bass from stereo sound programmes are not supported). -
Page 29: Tv Speakers (Xv/Zv/Vl/Yl/Wl Series Only)
CONTROLS AND FEATURES TV Speakers (XV/ZV/VL/YL/WL series only) Audio Description You can use this feature to turn off the TV speakers when you Audio Description is an additional narrative sound track for connect an audio system to the VARIABLE AUDIO OUT on visually impaired individuals to understand and enjoy the story your TV. -
Page 30: Widescreen Viewing
CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of WIDE widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible... - Page 31 CONTROLS AND FEATURES This setting will show the picture NATIVE without overscan, i.e. WYSIWYG. This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This option is only available when watching a PC signal source via HDMI or PC terminal. This setting will show the picture without overscan or side panels.
-
Page 32: Picture Controls
CONTROLS AND FEATURES Picture controls Picture preferences You can customize current picture mode settings as desired. For Most of the picture controls and functions are example, while selecting “Dynamic”, if you change the available in both digital and analogue modes. following items, such as Backlight, Contrast, Brightness, PLEASE NOTE: features not available will be greyed Colour, Tint, Sharpness and the Advanced Picture Settings... -
Page 33: Base Colour Adjustment
CONTROLS AND FEATURES Base Colour Adjustment Press to select an option you want to adjust, and then press to adjust the settings. The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful Press RETURN to return to the previous menu. -
Page 34: Active Backlight Control
CONTROLS AND FEATURES Active Backlight Control DNR – Digital Noise Reduction When Active Backlight Control is activated, it will DNR allows you to ‘soften’ the screen representation of a weak automatically optimize the backlighting levels for dark scenes. signal to reduce the noise effect. In the Advanced Picture Settings menu, press Select DNR from the Noise Reduction menu. -
Page 35: Active Vision M200 Pro (Wl Series)
CONTROLS AND FEATURES Active Vision M200 Pro (WL series) Press to select either Red, Green or Blue and press to select On. This feature will reduce picture blur without decreasing image Select Off for the other two colours. brightness, or adding flicker. Expert Mode In the Advanced Picture Settings menu, press select Active Vision M200 Pro. -
Page 36: Automatic Format (Widescreen)
CONTROLS AND FEATURES Automatic Format (Widescreen) In the Display Settings menu, highlight Picture Position. When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in Display Settings Widescreen format irrespective of the television’s previous Auto Format setting. -
Page 37: Using Your Home Network
Belgium Liechtenstein ® certification mark of the Wi-Fi Alliance Switzerland Lithuania • The TOSHIBA Dual Band WLAN Adaptor is intended for use Cyprus Luxembourg with the RV/TV/XV/ZV/VL/YL/WL series LCD TV’s and should Czech Republic Latvia not be used with any other devices. -
Page 38: Setting Up The Network
CONTROLS AND FEATURES Setting up the Network Easy Setup using PBC (Push Button Configuration) In the PREFERENCES menu, highlight Network Setup You can select the Network Type. and press In the PREFERENCES menu, highlight Network Setup Press to highlight Wireless Setup, and press and press Press to highlight Easy Setup, and press... - Page 39 CONTROLS AND FEATURES To cancel searching for the AP: Press to highlight Manual Setup, and press Press RETURN while searching for the AP. A message will appear; then, press C or c to select Yes and press Wireless Setup Easy Setup Assisted Setup Assisted Setup Manual Setup...
-
Page 40: Advanced Network Setup
CONTROLS AND FEATURES Wireless Information NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be The settings configured in Wireless Setup can be confirmed. low. It is recommended that Encryption be changed to AES (see “Manual Setup”... -
Page 41: Dns Setup
CONTROLS AND FEATURES NOTE: If you manually set the IP address, you must not use the Highlight Auto Setup, and then press to select same IP address for any other device. The IP address you use should be a private address. IP Address Setup DNS Setup Auto Setup... -
Page 42: Network Connection Test
CONTROLS AND FEATURES Using the software keyboard Press to highlight Secondary DNS Address, and edit in the same way as Primary DNS Address. You can enter text by using the Software Keyboard. MAC Address The Software Keyboard window will appear when you press on a field that accepts character input. -
Page 43: Setting Up The Media Renderer Feature
CONTROLS AND FEATURES Setting up the Media Change the password by using the Software Keyboard (see page 42), and then press the BLUE button. Renderer feature NOTE: The Web Password can be up to 15 characters Terminology: long. DMS: DLNA CERTIFIED™ Server Highlight Done, and then press DMR: DLNA CERTIFIED™... -
Page 44: Web Password Setup
CONTROLS AND FEATURES Web Password Setup Maximum Volume Setup This setup determines the password that is necessary for the This feature allows you to set the maximum volume of the TV DMC to access built-in web pages on the DMR. when it receives volume operation commands from a DMC. -
Page 45: Using Youtube™ (Xv/Zv/Vl/Yl/Wl Series Only)
CONTROLS AND FEATURES Using YouTube™ (XV/ZV/VL/ Press the BLUE button while displaying YouTube. YL/WL series only) The Function menu window will appear. YouTube is a video-sharing service managed by YouTube, LLC. Back Menu Forward Reload Home Pointer This TV allows you to view YouTube contents. http://www.youtube.com/xl NOTE: •... - Page 46 CONTROLS AND FEATURES To setup the Advanced Settings: Press to select Drag Mode, and press Press to select the setting items, and • will appear. press . A check will appear in the box. To remove the check, press again. Press , and then changes to...
-
Page 47: Using The Media Player
NOTE: Do not use any SD Memory Cards other than those specified. Press RETURN. DLNA CERTIFIED™ Server: Your PC (for example) You must obtain any required permission from copyright owners to download or use copyrighted content. TOSHIBA cannot and does not grant such permission. -
Page 48: Basic Operation
CONTROLS AND FEATURES Manual Start: Basic operation Insert USB device into the USB socket or SD Memory Using Media Player with a USB or SD Memory Card into the SD card slot on the right side of the TV. Card When Auto Start is enabled, you will be asked if you In the APPLICATIONS menu, select Media Player, want to start the Media Player whenever a USB or SD... -
Page 49: Viewing Photo Files
CONTROLS AND FEATURES To select a file in the list of contents: Viewing photo files Press to select a file or folder. There are three types of viewing modes. Multi View Press to move to the next layer, or press RETURN to return to the previous layer. - Page 50 CONTROLS AND FEATURES Single View Press to select File Name or Title, New or Old to set the sorting rule. In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually.
-
Page 51: Viewing Movie Files (On A Dlna Certified™ Server Or Usb Device)
CONTROLS AND FEATURES During playback: Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) • Press to pause. You can move to the desired replay position by pressing You can select movies from a list of available files. during PAUSE. - Page 52 CONTROLS AND FEATURES ® To sort the folders and files (DLNA only) To register your TV to a DivX account (XV/ZV/ VL/YL/WL series only) Press QUICK to open the Quick Menu in list mode. This TV allows you to play back files purchased or rented from ®...
-
Page 53: Playing Music Files (On A Dlna Certified™ Server Or Usb Device)
CONTROLS AND FEATURES To set the repeat mode: Playing music files (on a DLNA CERTIFIED™ Server or USB device) Press QUICK to open the Quick Menu. You can listen to music from a list of available files. Press to select Off, All or 1. Music Mode Description... -
Page 54: Using The Photo Frame Feature
CONTROLS AND FEATURES Using the Photo Frame To display the file status information (DLNA only) feature Press during playback. The information will be displayed on the bottom of the screen. You can use the TV screen as a digital photo frame. One image (pre-installed or user-installed) can be displayed. -
Page 55: Setting The Features
CONTROLS AND FEATURES B b C c Press to select Start, and then press to open Press to select the photo you want to copy Photo Frame. from the USB storage device or SD card to the TV's flash memory, and then press Photo Select /Folder 1/54... -
Page 56: Other Features
Press RETURN. TOSHIBA Illumination Select Start, and then press You can set the illumination mode of the TOSHIBA logo located on the front panel to On or Off. Apr/26 (Tue) AM 10:53... -
Page 57: The Timers
CONTROLS AND FEATURES The timers It will only be possible to create or edit programme timers for the currently tuned DTV input. Programme Timers – digital only On Timer This feature will set the television to go to a specific channel at The feature allows you to set the television to turn on a certain time. -
Page 58: Sleep Timer
CONTROLS AND FEATURES Energy Saving Settings Sleep Timer The television can be set to turn itself Off after a certain length of time. Automatic Power Down In the APPLICATIONS menu, press to select Sleep The TV will automatically turn itself off (standby) after 4 hours, Timer. -
Page 59: Digital On-Screen Information And Programme Guide
CONTROLS AND FEATURES Digital on-screen information Press to select Also. Details of programmes that have started on other channels will be provided. Use and Programme Guide to change the display contents. When viewing in digital mode, the on-screen To display More Information information and programme guide provide access to programme details for all available channels. -
Page 60: Guide
CONTROLS AND FEATURES Guide Genre selection/searching From the guide screen, you can use the genre selection and Select the on-screen guide by pressing GUIDE, and search features. the guide screen will appear highlighting details of the channel and programme currently being viewed. This Press the QUICK button from the guide screen. -
Page 61: Digital Settings - Parental Control
CONTROLS AND FEATURES Digital settings – parental Parental Setup control The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will In order to prevent viewing of unsuitable films and need to enter it before adjusting the level. -
Page 62: Digital Settings - Channel Options
CONTROLS AND FEATURES Digital settings – Channel Skip channels Options This feature allows you to set channels that will be skipped when or P are used to tune. Selecting favourite channels Select the channel you want to skip in your channel list. -
Page 63: Digital Settings - Other Settings
CONTROLS AND FEATURES Digital settings – other Common Interface settings The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider Subtitles and allow additional subscription broadcasts to be viewed. -
Page 64: Software Upgrade And Licences
CONTROLS AND FEATURES Software Upgrade and Network Upgrade Licences TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via the Network. Before downloading software; Auto Upgrade Configure your TV to connect to the Internet. -
Page 65: System Information And Reset Tv
In the Display Settings menu, press until PC Settings is highlighted. Press to display the System Information. Display Settings System Information Auto Format TOSHIBA 4:3 Stretch 2010 2.1.26.0 Feb 19 2010 - 15:56:50 FW:13 PC Settings WEAK AVERAGE STRONG Ch22... -
Page 66: Sampling Clock
CONTROLS AND FEATURES Input selection and AV Sampling Clock connections Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. See page 9 for a detailed image showing In the Display Settings menu, press until PC recommended connections. -
Page 67: External Input Skip
CONTROLS AND FEATURES External input skip Input signal selection This feature is designed to make input selection more This specifies the type of signal going into SCART 2 (EXT 2) on convenient. the back of the television. Please refer to the manufacturer’s instructions for the connected equipment. -
Page 68: Labeling Video Input Sources
CONTROLS AND FEATURES Labeling video input sources PC Audio These input labels are shown in the input selector. You can label In order to receive sound from a connected PC, plug the audio video inputs according to the devices you have connected to the cable into the back of the television (as shown in the ‘Connecting a computer’... -
Page 69: Hdmi Settings
CONTROLS AND FEATURES HDMI Settings Digital Audio Output Some early HDMI equipment may not work properly with your When connecting a surround sound amplifier to the digital HDMI TV. Please try setting the Enable Content Type and audio output (Sony/Philips Digital Interface Format INSTAPORT™... -
Page 70: Using Regza-Link
When Amplifier Control is set to On, it allows the “Speaker This is a new feature that uses CEC technology and Preference” feature to become available. allows you to control Toshiba REGZA-LINK compatible devices from the television remote In the REGZA-LINK Setup menu, press to highlight control via HDMI connection (page 11). -
Page 71: Regza-Link Playback Device Control
All of the remote control keys may not be available. This feature automatically adjusts the suitable widescreen Please refer to the operation manual for each piece of formats and picture preferences when connected to a Toshiba equipment connected. PC compatible with REGZA-LINK. -
Page 72: Text Services
LIST will save your four favourite pages. For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba Selecting modes dealer. The text character set will be automatically chosen by the language setting in the SETUP menu. -
Page 73: Control Buttons
TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. -
Page 74: Problem Solving
PROBLEM SOLVING Questions and Answers What else can cause a poor picture? Below are the answers to some of the most Interference or a weak signal. Try a different television common queries. station. Manual Fine Tuning may help. Why is there no sound or picture? Select the ATV Manual Tuning menu. - Page 75 PROBLEM SOLVING What is DVB-T? Why are there problems with analogue text? Digital Video Broadcast via an aerial/antenna. Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial.
- Page 76 PROBLEM SOLVING Why doesn't the wireless network work? Make sure the TOSHIBA Dual Band WLAN Adaptor is used (see page 13). Check that the AP is powered on. Why doesn't the Media Player feature operate? Make sure that devices are connected correctly.
-
Page 77: Information
INFORMATION License Information ® DLNA , the DLNA Logo and DLNA CERTIFIED™ are trademarks, Manufactured under license from Dolby service marks, or certification marks of the Digital Living Laboratories. Network Alliance. Dolby and the double-D symbol are registered THIS PRODUCT IS LICENSED UNDER THE AVC PATENT trademarks of Dolby Laboratories. - Page 78 INFORMATION Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal…...
-
Page 79: Information
INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No. - Page 80 INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur;...
-
Page 81: Specifications And Accessories
INFORMATION Specifications and accessories Receiving systems Stereo Nicam 2 carrier system DVB-T Broadcast systems/channels Broadcast systems/channels Visible Screen Size Model 32 80cm UHF 21-68 PAL-I UHF UK21-UK69 (approx.) 94cm France VHF 05-10 (VHF 01-05) PAL-B/G UHF E21-E69 102cm UHF 21-69 VHF E2-E12, S1-S41 117cm 139cm... - Page 82 Temperature 5°C - 35°C (41°F - 94°F) Humidity 20 - 80% (non-condensing) Supplied accessories Remote control 2 batteries (AAA, IEC R03 1.5V) 'P' Clip Cleaning cloth TOSHIBA Dual Band WLAN Adaptor WLM-10U2 with Gooseneck cable (for VL/YL/WL series) Standard: IEEE 802.11a/b/g/n Host Interface: USB2.0 compatible Frequency Range: 5.15-5.35 GHz, 5.47-5.725 GHz,...
- Page 83 INFORMATION For your own records...
- Page 84 INFORMATION © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.