Table of Contents
Advertisement
Emergency release of the electric parking brake - EPB
This procedure is required when the electric release button cannot
open the EPB callipers and a warning light and pop-up appears on the
instrument panel with the special symbol and the message "EPB failure.
Only manual unlock allowed. See manual."
Warning
The release procedure must only be carried out by specialised workshop
technicians.
If the system cannot be released, contact the nearest F
C
.
ENTRE
If the vehicle needs to be moved but the EPB cannot be disengaged due to
a flat battery or a failure in the electrical system controlling the parking
brake, the emergency release procedure must be performed by a F
S
N
centre.
ERVICE
ETWORK
Park Lock emergency release
Warning
The Park Lock must only be released using the special tool after
checking that the parking brake has been applied and is an operation
that must only be carried out by specialised workshop technicians. We
recommend contacting a F
ERRARI
Warning
This should be avoided unless absolutely necessary:
- to tow the vehicle onto a recovery vehicle;
S
ERRARI
ERVICE
ERRARI
S
C
.
ERVICE
ENTRE
- if there is a Park Lock failure (the following message is shown on the
instrument panel: "Only manual unlock gearbox allowed: See manual".
Warning
When the Park Lock safety device is released manually, the vehicle
may move unexpectedly. The vehicle is only kept stationary by the
parking brake, if applied.
The Park Lock manual emergency release device is located on the gearbox
and can be accessed via the opening shown on the trim panel, on the RH
rear side of the engine compartment.
To perform the Park Lock emergency release procedure, do the following:
●
Take wrench
A
and extension
●
Join the two parts together and fasten with clip C.
B
C
Warning
The tools A and B may only be used by specialised workshop
technicians, as indicated on the label D on the tool bag.
B
out of the tool bag.
A
Roadside Recovery
1
61
Hide quick links:
Advertisement
Table of Contents
