Advertisement
FIGURE 7
9. Install A/C switch into rear of console (item 6 pg2)
and O.E. bracket over A/C switch. Make sure control
snaps securely into bracket. See Figure 8.
10. Secure bracket to console brace using (2) two # 8 x
9/16" screws (item 1 pg 2). See Figure 8.
8. Remove and retain mounting bracket and screws
(items 5&3 pg2) from console (item 6 pg2). Use
rubbing alcohol to clean sheet metal in the cut–out
area in headliner. Wipe surface dry with a clean
cloth. Remove protective tape from adhesive
strips on mounting bracket (item 5 pg2). Make
sure bracket is centered prior to pressing tape
against roof surface. Once the tape is applied
to the roof, DO NOT REMOVE AND
REPOSITION or the tape will not stick
properly. Install using (2) two O.E. screws in
original holes and (2) two # 10 x 1/2" TEK screws
(item 2 pg2). See Figure 7.
5
FIGURE 8
Advertisement
