Wiring - SMC Networks ISA3 Series Operation Manual

■Wiring

○Mounting and removal of connector
Tighten the connector by hand.
Align the body connector key and the cable connector key groove to insert vertically.
Turn the knurled part of the cable side connector clockwise.
Connection is complete when the knurled part is fully tightened. Check that the connection is not loose.
○Connector pin No. (Body side)
Connector pin No. Description
1 DC(+)
2 OUT2
3 DC(-)
4 OUT1(C/Q)
-36-
3 Installation
No.PS※※-OMW0009-A