Taking Measurements - Tanita BC-401 Instruction Manual

Taking Measurements

1.
When the monitor power is off, select "Input Data" in the app and
then follow the instructions in the app.
When (0.0 lb, 0.0 stlb) is displayed, step onto the monitor.
2.
Measurement data is automatically sent to the smartphone.
If there is unsent data stored on the monitor, that data is also sent to the smartphone.
Note:
When taking measurements while holding your smartphone, enter the weight that you
want to subtract into the "Smartphone's weight" section in the dedicated app before
taking measurements.
The weight that you entered to be subtracted from your weight is displayed.
The "Smartphone's weight" can be entered up to -2.0 kg (-4.4 lb, -4 lb).
The maximum weight (weighing capacity) is reduced by the amount entered for the
"Smartphone's weight".
If you do not have your smartphone when taking measurements.
Simply step onto the monitor. The auto-recognition feature will automatically recall your
personal data. Your monitor will store up to 10 sets of measurements.
Saved data is sent to the smartphone together with new measurements the next time the
smartphone is connected to the monitor when taking measurements.
Note:
Up to 10 measurements can be stored in the device per ID number.
Each new data entered after this amount causes the oldest data to be deleted.
will notify you if pairing is complete and there is unsent data.
11