Enable Plug-In Modules - Alcatel-Lucent 9500 MPR User Manual

4.7.1

Enable Plug-In Modules

P32E1DS1, P2E3DS3, and MD300 modules must enabled in order to communicate what
type of module is in what MSS slot to the microprocessor on the Control & Switching Mod-
ule (CSM). This is accomplished on the Settings screen for that module. The CSM in MSS
slot 1 is enabled by default. The ODU is enabled concurrently with the associated MD300
module. The Fan Unit must be enabled.
Enable MSS modules using the following procedures. See
4.7.1.1 Enable Spare CSM
See Figure 4 - 3. Follow the steps to enable the Spare CSM in Slot 2.
JUSM_9500MP-A_1.0 - MSS2 - Administrator
CRI MAJ MIN WNG IND
0 3 0 0
1
Protection Schemes
Equipment
1
NE 9500MPR-A 1.0
MSS-8
Slot#1 MSS/CORE-MAIN
Slot#2 MSS/CORE-SPARE
Slot#3
Slot#4
Slot#5 MSS/E1-MAIN
Slot#6 MSS/E1-SPARE
Slot#7 MSS/RADIO Dir#7-Ch#1
Slot#8 MSS/RADIO Dir#7-Ch#0
Slot#9 MSS/FAN6
ODU Dir#7-Ch#1
ODU Dir#7-Ch#0
Displays Profile Name
selected on Alarm Severity
Profile screen.
Screen shows CSM in slot 2 after Apply has been activated.
Synchronizations Connections
1
3
5 5 5
7 7 7
Settings
Settings
tab 2
Include alarms from sub-nodes
Severity Event Time
Alarms Settings Remote Inventory
Equipment Type CORE
Alarm Profile
All Alarms
Choose Core from the
dropdown menu for the
spare protected core
card in slot 2.
Note
Figure 4 - 3 Enable Spare CSM
Figure 4 - 3
7
8
2 2 2 2 2 2 2
4
6
8
Remote Inventory
Entity Probable Cause
4
Apply
EMPTY
3
CORE
through Figure 4 -
Help
EXT EQP TRS
0 4 2
COM
SUP
OS
NTP
9
AC
Topic
Help
Help
Apply the
Equipment
Type.
9500-1359A
08/21/08
4-21
10.