Start Webeml - Alcatel-Lucent 9500 MPR User Manual

4.6

START WebEML

1.
Click on the shortcut icon on the desktop to start WebEML.
There are three methods available to access the NE CT screens, based on the status of the
NE configuration tables that identify the NE in the system. If the NE is already listed in the
NE Table as part of the system, a simple procedure (Startup WebEML From An Existing
Configuration) allows this information to be downloaded to the NE Confi guration screen.
If the system is new or the NE is being added to an existing system, the Startup WebEML
With A New Configuration method can be used to create a new table or add a new NE to
the table.
The Manual WebEML Startup method can be used anytime to access the NE. This entails
writing in the NE information in the fields on the NE Configuration screen. Manual
WebEML Startup is shown here.
Manually Enter the Information
Follow default procedure below to manually start up the application.
1.
Enter the IP Address 10.0.1.2.
2. OK
Click
3. Show
Click
3
4-18
.
.
1
Go to
9500-4035A
08/25/08
2
4
9500-1339A
08/05/08