Advertisement
I. Function and Operations
Figure 5 illustrates the controls and indicators of the LCMR4N rear view mirror:
A: Rearview mirror
B: 4" LCD panel
C: Hands free Microphone
D: Brightness Control
E: Power indicator (Red when power
Is on)
F: Volume Control Knob
M: Speakers
SW1 and SW2:
SW1: Turn on the Navigation display timer mode. When SW1 is pressed, the
LED will turn yellow. The navigation image will appear for the preset time 30sec,
2.5 minutes or 5 minutes. Once the preset time has expired, the LCD will turn off.
The navigation image will reappear with the next voice command prompt from
the navigation computer.
SW2: Turns the navigation screen image on and off. Press once to turn on the
continuous Navigation display. Press again to turn off the Navigation display.
Then press Sw 1 if you want to engage the Voice command navigation display
timer.
Figure 1
G: Switch 1 (see below)
H: Switch 2 (see below)
J: 3-position switch for Navigation Voice
command display timer on front of
mirror (30 sec., 150 sec., 300 sec.)
K: Remote IR Sensor
L: 2-position Switch for hands free
microphone Sensitivity High/Low Select
3
Advertisement
