Remote Sensor; Error Signs - Audiovox CDI-100R Owner's Manual

bl

REMOTE SENSOR

The sensor for the infrared signal from the optional wireless
remote control is located behind this lens. For optimal operation
of the remote control, keep the lens clean and do not allow objects
to block it.
If a problem should develop while operating the CD changer, the following error signs may be
displayed on the LCD panel:

ERROR SIGNS

E - 01 :
Indicates abnormal disc change function. Contact the place of
purchase for further service advise.
E - 30 :
Indicates excessive temperature conditions. The error sign will go
off and play will resume when the changer temperature returns to
normal range
- - - - :
Magazine is not loaded in the changer.
0 - 0 0 :
No discs are loaded in the magazine.
1 - - - :
No disc is loaded in magazine slot #1. (2--- indication for slot #2, etc.)
bm
RESETBUTTON
A reset button is located on the front panel of the remote control
which must be activated with a pen or other thin object as it is
recessed to prevent accidental engagement. The reset circuitry is
provided to protect the unit's microprocessor and laser pick-up
system and should only be activated under the following circum-
stances:
1. Initial installation after all wiring is completed (this must be
done).
2. If abnormal disc operation is encountered, the reset button
may be pressed to clear the system and return to normal
operation.
-4-