Nokia RM-11 Series Troubleshooting Manual page 67

CC Technical Documentation
6. Oscillator Failure: Inspect all GPS circuit elements around D051.
If pass visual inspection, then replace B002.
D051
B002
7. CW Test Failure: Check that signal generator is on and sourcing a signal to the
GPS RF input port (X001).
a. Inspect all GPS RF circuit elements.
b. Inspect all GPS circuit elements around D051.
If all visual inspection looks good, then replace GPS RF IC (N001).
Issue 2 09/2005
© 2005 Nokia Corporation
Troubleshooting - RF
Confidential
RM-11
Page 67