Tx Troubleshooting Using Phoenix - Nokia RM-11 Series Troubleshooting Manual

CC Technical Documentation

Tx Troubleshooting Using Phoenix

1. Use the Phone Control dialog box to turn on the mobile terminal.
2. Click the Phone State tab.
3. Click Local in the State Selectors list, and click Execute . This change the state
to Local Mode.
4. Use the RF Main Mode dialog box to set:
• Band
• Channel
• Rx/Tx mode
Note: Be sure the "Main Mode set successfully" message appears.
5. Open the DSP menu, and click CDMA Control .
Issue 2 09/2005
© 2005 Nokia Corporation
Troubleshooting - RF
PCS Band
Cell Band
Confidential
RM-11
Page 45