Burner Start-Up Cycle - Riello 40 Installation, Use And Maintenance Instructions

Oil burner

Hide thumbs Also See for 40:

Installation, use and maintenance instructions (60 pages)

Installation & operating manual (20 pages)

Installation manual (21 pages)

Table Of Contents

Table of Contents

Available languages

FAILURE DETECTION ON HEATING DEVICE

NORMAL OPERATION

The plug fitted in the panel is placed in the position

corresponding to "Resistance ON"

drawing on the right).

When the remote control closes, the LED lights up

and, after about two minutes, the burner starts up.

BURNER DOES NOT OPERATE

1) If the LED is OFF, the heating resistance placed

in the nozzle-holder is off.

2) If the LED is ON and nevertheless the burner

does not run, place the plug in the position cor-

responding to "Resistance OFF"

drawing on the right) .

If the motor runs, the delaying device inside the

control box is out of order.

3) If the motor does not run, it means that the fail-

ure is neither in the panel nor in the resistance,

but elsewhere.