Remington MODSAW Mounting, Tensioning, And Maintenance Instructions page 3

DISASSEMBLY
Continued
3. Turn chain tensioning screw counter-clockwise to
loosen chain (see Figure 1).
4. Remove guide bar nut.
5. Remove sprocket cover (see Figure 1).
6. Rotate guide bar retainer so that it is positioned
parallel to guide bar slot (see Figure 2).
7. Remove the old bar and chain.
Guide Bar
Nut
Figure 1 - Loosen and Remove Guide Bar Nut
Drive
Sprocket
Figure 2 - Unlocking Guide Bar Retainer
115038
Sprocket Cover
3
Chain Tensioning
Screw
Guide Bar
Guide Bar Retainer
Positioned Parallel to
Guide Bar Slot
www.desatech.com