March 2020
8
Configure
Each F
OUNDATION
displaying and performing configurations. Some use device descriptions
(DD) or DD methods for configuration and to display data consistently
across platforms. There is no requirement that a host or configuration tool
support these features. Use the following block examples to do basic
configuration to the transmitter. For more advanced configurations, see the
Rosemount 2051
Note
™
DeltaV
blocks and Control Studio for the Function Blocks.
8.1
Configure the AI block
If your configuration tool supports Dashboard DD's or DTM's you may use
either guided setup or manual setup. If your configuration tools don't
support Dashboard DD's or DTM's, use manual setup. Navigation
instructions for each step are provided below. In addition the screens used
for each step are shown in
Figure 8-1: Configuration Flowchart
Quick Start Guide
Fieldbus host or configuration tool has a different way of
Reference
users should use DeltaV Explorer for the Resource and Transducer
Manual.
Device revisions and
Quick Start Guide
drivers.
21