Receiving Items - Texas Instruments TI-84 Plus Manual Book

Receiving Items

LINK RECEIVE Menu
To display the
LINK RECEIVE
SEND RECEIVE
1: Receive
Receiving Unit
When you select
receiving unit, the message
displayed. The receiving unit is ready to receive transmitted items. To exit
the receive mode without receiving items, press É, and then select
from the
1:Quit
When transmission is complete, the unit exits the receive mode. You can
select
1:Receive
displays a list of items received. Press y 5 to exit the receive mode.
DuplicateName Menu
During transmission, if a variable name is duplicated, the
DuplicateName
DuplicateName
1: Rename
2: Overwrite
3: Omit
4: Quit
When you select
lock is on. Enter a new variable name, and then press Í. Transmission
resumes.
When you select
existing data stored on the receiving unit. Transmission resumes.
When you select
duplicated variable name. Transmission resumes with the next item.
When you select
receive mode.
Receiving from a TI-84 Plus Silver Edition or TI-84 Plus
The TI-84 Plus Silver Edition and the TI-84 Plus are totally compatible.
Keep in mind, however that the TI-84 Plus has less Flash memory than a
TI-84 Plus Silver Edition.
Communication Link
menu, press y 8 ~.
Sets unit to receive data transmission.
from the
1:Receive
Waiting...
menu.
Error in Xmit
again to receive more items. The receiving unit then
menu is displayed on the receiving unit.
Prompts to rename receiving variable.
Overwrites data in receiving variable.
Skips transmission of sending variable.
Stops transmission at duplicate variable.
, the
1:Rename
, the sending unit's data overwrites the
2:Overwrite
, the sending unit does not send the data in the
3:Omit
, transmission stops, and the receiving unit exits
4:Quit
LINK RECEIVE
and the busy indicator are
prompt is displayed, and alpha-
Name=
menu on the
127