Texas Instruments TI-84 Plus Manual Book page 133

After all selected items have been transmitted, the message
displayed on both calculators. Press } and † to scroll through the
names.
Sending to a TI-84 Plus Silver Edition or TI-84 Plus
You can transfer variables (all types), programs, and Flash applications to
another TI-84 Plus Silver Edition or TI-84 Plus. You can also backup the
RAM memory of one unit to another.
Note: Keep in mind that the TI-84 Plus has less Flash memory than the
TI-84 Plus Silver Edition.
• Variables stored in RAM on the sending TI-84 Plus Silver Edition will
be sent to the RAM of the receiving TI-84 Plus Silver Edition or TI-84
Plus.
• Variables and applications stored in the user data archive of the
sending TI-84 Plus Silver Edition will be sent to the user data archive
of the receiving TI-84 Plus Silver Edition or TI-84 Plus.
After sending or receiving data, you can repeat the same transmission to
additional TI-84 Plus Silver Edition or TI-84 Plus units—from either the
sending unit or the receiving unit—without having to reselect data to
send. The current items remain selected. However, you cannot repeat
transmission if you selected
To send data to an additional TI-84 Plus Silver Edition or a TI-84 Plus:
1. Use a USB unit-to-unit cable to link two units together.
On the sending unit press y 8 and select a data type and items
2.
to .
SEND
Press ~ on the sending unit to display the
3.
On the other unit, press y 8 ~ to display the
4.
Press Í on the receiving unit.
5.
Press Í on the sending unit. A copy of the selected item(s) is sent
6.
to the receiving unit.
7. Disconnect the link cable only from the receiving unit and connect it
to another unit.
Press y 8 on the sending unit.
8.
9. Select only the data type. For example, if the unit just sent a list,
select
4:LIST
Note: The item(s) you want to send are pre-selected from the last
transmission. Do not select or deselect any items. If you select or
Communication Link
All+
.
..
or
All
TRANSMIT
is
Done
menu.
menu.
RECEIVE
125