Advertisement
ATW-DA49 Set up (Fig. E)
12. +12V DC power is supplied through the ATW-DA49
Antenna Distribution System to each receiver.
13. Channel "B" distribution output connects to antenna "B"
input jack on receiver.
14. Channel "A" distribution output connects to antenna "A"
input jack on receiver.
Figure E ATW-DA49 Set Up
12
13
Extensive information about using wireless systems and accessories is available on the Audio-Technica Web site at
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 330/686-2600
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England (0)113 277 1441
14
www.audio-technica.com
Specifications
Bandwidth
Gain
Impedance
Antenna Power (optional)
Termination Type
Power Supply
Dimensions (Base unit only) 8.27" (210.0 mm) W x
Weight
Accessories Included
One-Year Limited Warranty
Audio-Technica professional wireless systems purchased in the
U.S.A. are warranted for one year from date of purchase by Audio-
Technica U.S., Inc. ( A. T .U.S.) to be free of defects in materials and
workmanship. In event of such defect, product will be repaired
promptly without charge or, at our option, replaced with a new prod-
uct of equal or superior value if delivered to A. T .U.S. or an Authorized
Service Center, prepaid, together with the sales slip or other proof of
purchase date. Prior approval from A.T.U.S. is required for return.
This warranty excludes defects due to normal wear, abuse, shipping
damage, or failure to use product in accordance with the instruc-
tions. This warranty is void in the event of unauthorized repair or
modification, or removal or defacing of the product labeling.
For return approval and shipping information, contact the
Service Dept., Audio-Technica U.S., Inc., 1221 Commerce Drive,
Stow, Ohio 44224.
Except to the extent precluded by applicable state law, A.T.U.S. will
have no liability for any consequential, incidental, or special
damages; any warranty of merchantability or fitness for partic-
ular purpose expires when this warranty expires.
This warranty gives you specific legal rights, and you may have other
rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for warranty
details.
P51824 ©2006 Audio-Technica U.S., Inc. Printed in U.S.A.
440-900 MHz
0 dB typical (within specified bandwidth)
50 ohms typical (within specified
bandwidth)
+12V DC, center positive,
100 mA maximum per antenna input
(2 total)
BNC Female (10 total)
Desktop Switching Power Supply
Rated at 3A @ 12V DC or 36 Watts.
Input Voltage 100-240V AC via
detachable IEC 320/C14 cable.
Output is provided on an overmolded
3-pin Molex-style termination.
1.79" (45.5 mm) H x
6.93" (176.0 mm) D
2.0 lbs. (0.9 kg)
IEC 320/C14 power cable;10 BNC-to-
BNC 34" RF cables; 4 DC power
interconnect cables; ATW-RM1 rack kit
for front mounting antennas and
adaptation to a 19" rack.
Advertisement
