Dell EMC PowerEdge C6420 Manual page 120

Related link
Installing a sled
Installing the air shroud
Installing the expansion card riser assembly
Installing a processor and heat sink module
Installing a memory module
Installing the OCP card
Installing a mezzanine card
Installing the support bracket
Restoring the Service Tag by using the Easy Restore feature
By using the Easy Restore feature, you can restore your Service Tag, license, UEFI configuration, and the system configuration data after
replacing the system board. All data is automatically backed up in a backup flash device an rSPI card automatically. If BIOS detects a new
system board and the Service Tag in the backup flash device rSPI card, BIOS prompts the user to restore the backup information.
1 Turn on the system.
If BIOS detects a new system board, and if the Service Tag is present in the backup flash devicerSPI card, BIOS displays the Service
Tag, the status of the license, and the UEFI Diagnostics version.
2 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
• Press N to navigate to the Dell Lifecycle Controller based restore options.
• Press F10 to restore data from a previously created Hardware Server Profile.
After the restore process is complete, BIOS prompts to restore the system configuration data.
3 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
After the restore process is complete, BIOS prompts to restore the system configuration data.
4 Perform one of the following steps:
• Press Y to restore the system configuration data.
• Press N to use the default configuration settings.
After the restore process is complete, the system restarts.
120 Installing and removing system components