Advertisement
AT961R and AT961RP Specifications
Element
Polar Pattern
Frequency Response
Low-frequency Roll-off
Open Circuit Sensitivity
Impedance
Maximum Input Sound Level
Dynamic Range (Typical)
1
Signal-to-noise Ratio
Switch
Phantom Power Requirements
AT961R
Weight
AT961RP
Dimensions
AT961R
Output Connector
AT961RP
AT961R
Cable
AT961RP
Accessory Furnished
AT961R
2.87"
73.0 mm
audio-technica
2.09"
53.0 mm
0.63"
16.0 mm
Audio-Technica microphones and accessories purchased in the U.S.A. are warranted for one year from date of
purchase by Audio-Technica U.S., Inc. (A.T .U.S.) to be free of defects in materials and workmanship. In event of
such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of
equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales
slip or other proof of purchase date. Prior approval from A.T.U.S. is required for return. This warranty
excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with
instructions. This warranty is void in the event of unauthorized repair or modification.
For return approval and shipping information, contact the Service Department, Audio-Technica U.S., Inc.,
1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law, A.T.U.S. will have no liability for any consequential,
incidental, or special damages; any warranty of merchantability or fitness for particular purpose
expires when this warranty expires.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for warranty details.
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
†
Fixed-charge back plate permanently polarized condenser
Half-cardioid (cardioid in hemisphere above mounting surface)
30-20,000 Hz
150 Hz, 6 dB/octave
–33 dB (22.4 mV) re 1V at 1 Pa*
200 ohms
130 dB SPL, 1 kHz at 1% T.H.D.
103 dB, 1 kHz at Max SPL
67 dB, 1 kHz at 1 Pa*
Flat response, low-roll-off
9-52V DC, 2 mA typical
5.1 oz (145 grams)
5.2 oz (148 grams)
3.59" (91.3 mm) maximum length
2.87" (73.0 mm) maximum body width
TB3M
3-conductor
1
/
" (6.3 mm) plug
4
25' (7.6 m) long, 0.13" (3.2 mm) diameter cable
terminating in TA3F and XLRM-type connectors
None
Soft protective carrying case
†
In the interest of standards development, A.T.U.S. offers full details
on its test methods to other industry professionals on request.
2
* 1 Pascal = 10 dynes/cm
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
AT961RP
2.87"
73.0 mm
1.44"
36.5 mm
3.59"
91.3 mm
audio-technica
2.09"
53.0 mm
One -Year Limited Warranty
LEGEND
3.59"
91.3 mm
2.83"
71.8 mm
1.22"
31.0 mm
0.63"
16.0 mm
/
AT961R
AT961RP
Polar Pattern
0
30
330
300
270
240
210
150
180
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
Frequency Response
50
100
200
500
2k
1k
5k
Frequency in Hertz
12" or more on axis (flat)
Roll-off
Screw-mount Template
(Actual Size)
1.88"
47.8 mm
0.94"
23.9 mm
2.00 "
50.8 mm
Final position,
front edge of mic
C L
Form No. 0309-9215-01-B/W P50899
© 1996 Audio-Technica U.S., Inc. Printed in U.S.A.
60
90
120
10 dB
10k
20k
Advertisement
