natus Xltek Trex HD Patient Manual
Hide thumbs
Also See for Xltek Trex HD:
- User & service manual (68 pages) ,
- User & service manual (60 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for natus Xltek Trex HD
Summary of Contents for natus Xltek Trex HD
- Page 2 Natus Neurology Incorporated or its distributors. Natus Neurology Incorporated makes no representations or warranties of any kind whatsoever with respect to this document. Natus Neurology Incorporated disclaims all liabilities for loss or damage arising out of the possession, sale, or use of this document.
-
Page 3: Warnings And Cautions
Xltek® Trex™ HD Patient Guide Warnings and Cautions Keep the Trex HD system dry and away from liquids. Do not use accessories or parts that are not described in these instructions as it could be unsafe. Do not modify this equipment! Strangulation can occur when long cables or tubing is used. -
Page 4: Setting Up The Video Camera
Xltek® Trex™ HD Patient Guide Trex HD Setup The Trex HD until will be pre-configured by the Healthcare professional prior to the unit being sent home. You may have devices attached which are different than shown, as it depends on the type of test being performed. Please follow the additional instructions for recording movement and activities in the Patient Instructions and Diary (p/n 105902) provided by your Healthcare professional with this unit. - Page 5 Xltek® Trex™ HD Patient Guide Attaching the Trex HD pouch to a belt or a lanyard Your healthcare provider will demonstrate how to secure the Trex HD pouch on your body using a belt or lanyard. Before attaching the belt or lanyard, the Trex HD device must be placed in the pouch with the zippers closed as much as possible.
-
Page 6: Connecting The Spo
Xltek® Trex™ HD Patient Guide Lanyard Setup To use the lanyard setup: Attach the lanyard to the two (2) rings on the back of the pouch. Place the lanyard around the patient’s neck or shoulder, or hang it on the bedside post. Connecting the SpO Sensor ... - Page 7 Xltek® Trex™ HD Patient Guide Connecting the Trex HD to the External Power Pack An optional power pack can be connected to the Trex HD using a round, 5-pin connection to a standard mini-USB connector cable. The round, 5-pin connector is plugged directly into the external battery pack, and the mini-USB connector cable is plugged into the Trex HD.
- Page 8 Xltek® Trex™ HD Patient Guide Trex HD (Front View) Power LED Status LED Oximeter / Photic Connection Reference Input (forward) Common Input (rear) 24 Referential Inputs (two rows) Patient Event Switch Connection DC Inputs (rear row) Differential Inputs (forward row) USB Connection (bottom) Trex HD (Rear View) NOTE: Dispose of used, non-rechargeable batteries in accordance with local...