Capacity...................................................................................................................................... 800 GPM/3028 LPM
Weight ...................................................................................................................................................59 lbs/26.7 kg
Height (over handle) ............................................................................................................................. 16.5 in./42 cm
Length................................................................................................................................................... 19 in./48.3 cm
Width .................................................................................................................................................... 15 in./38.1 cm
Pressure ........................................................................................................................................... 2000 psi/140 bar
Flow Range ............................................................................................................................ 7–10 GPM/26–38 LPM
Maximum Flow ................................................................................................................................. 10 GPM/38 LPM
Porting ............................................................................................................. #10 SAE (pressure) #12 SAE (return)
Connect Size and Type .......................................................... 1/2 in. Male Pipe (pressure) 1/2 in. Male Pipe (return)
Discharge Diameter ................................................................................................................. 4 in./100 mm Camlock
Inlet Diameter ......................................................................................................................................... 4 in./100 mm
ACCESSORIES
Description
Male Adapter / Female THD 4-8 NPT ................................................................................................................21967
Lay-Flat Discharge Hose Blue, 4 in. × 25 ft with Camlock Fittings ....................................................................65624
MAINTENANCE
Grease motor (Item 16, page 17) with 2 Strokes of
Underwater Grease
Volute Intake (Clean)
Check Fasteners for Tightness
C
Clean.
I
Inspect.
CLEANING THE PUMPING CHAMBER
Debris such as weeds, sand and other solids may become trapped in the water hose and pumping chamber.
This can reduce pump performance. It is important that the pumping chamber be kept clean at all times.
The chamber can be cleaned as follows:
1. Remove wear plate by removing the six capscrews.
2. Remove all debris from the volute area.
3. Thoroughly clean the volute and impeller. Do not remove the impeller unless necessary for repair or replace-
ment or to remove trapped debris.
4. Re-assemble and clean the capscrews and lubricate the threads with underwater grease before installation.
5. Remove all debris from the hose. Otherwise, solids will backfill the pump.
14 ► TP08 User Manual
SPECIFICATIONS
Daily
As Needed
C
I
Part No.
Hours
100