Technical Specifications - Danfoss FH-CWD Instruction

9. Technical Specifications

Feature
Approval
Colour
Dimensions
Adjustment mode
Programmable
Fault indication/
failure mode
Frost protection
Ambient
temperature
Precision
Hysteresis
IP class
LCD backlight/
nightlight
8
VI.CU.B2.02
Instruction FH-CWD Thermostat
Description
CE Marking, EN 60730
White RAL 9016
86 x 99 x 19mm
Push buttons
No
If room sensor failure, E1 will
be displayed. If floor sensor
failor, E2 will be displayed.
In any case, thermostat will
turn off all output of relays.
Yes, if enabled:
< 5 °C heating on
> 7 °C heating off
- 10 °C – 60 °C
±1 °C
1 °C, symmetrical around
the setpoint temperature
30
Yes
Produced by Danfoss Floor Heating Hydronics 05.2011