Installation; General Usage - Danfoss FH-CWD Instruction

3. Installation

Installing the Room Thermostat- fig. 5 and fig. 6
• Remove the connection cable between front and
back part.
• Connect the thermostat correctly to mains supply
according to the Wiring Diagram - fig 6.
• Mount the thermostat by using the enclosed
screws to the wall box.
• Mount the front correctly.
Wiring Diagram – fig. 6
The product must be connected to the following
leads:
• Term L:
• Term NO:
• Term NC:
• Term N:
• Term 2:
• Terminal S2:
• Terminal S1:

4. General usage

Turn ON/OFF the Room Thermostat Fig. 1 
• Turn the thermostat on or off by pressing
4
VI.CU.B2.02
Instruction FH-CWD Thermostat
Phase (L) AC85-250V, 50/60 Hz
Valve (NO)
Valve (NC)
Neutral (N)
Empty
Floor sensor
Floor sensor
Produced by Danfoss Floor Heating Hydronics 05.2011
.