Service Note; Method For Copying Or Erasing The Data In Internal Memory; Regarding Fuse - Sony DSC-W370 Service Manual

1-1. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note1: When replacing main board, erase the data in internal memory of main board before replacement.
Note2: When replacing main board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a memory card.
1 Insert a memory card with sufficient free capacity into the camera.
2 MENU t (Settings) t (Memory Card Tool) t [Copy] t [OK]
t z on the control button
Notes
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• Images cannot be copied individually.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the memory card after copying, then format the internal memory ([Format] in
[Internal Memory Tool]).
• A new folder is created on the memory card and all the data will be copied to it. Yo u cannot choose a
specific folder and copy images to it.
Method for Formatting the Internal Memory
Format
Formats the memory card or the internal memory. When you use a memory card with this
camera for the first time, it is recommended to format the card using the camera for stable
performance of the memory card before shooting. Note that formatting permanently erases all
data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
1 MENU t (Settings) t
(Memory Card Tool) or
Memory Tool) t [Format] t [OK] t z on the control button
Note
• Note that formatting permanently erases all data including even protected images.
DSC-W370

1. SERVICE NOTE

(Internal

1-2. REGARDING FUSE

• MAIN BOARD
Ref .No: F2, F3
Part No: 1-576-415-11
Description: FUSE, MICRO (1608 TYPE) (2A/32V)
F2
F3
1-1E
Ref .No: F1
Part No: 1-523-038-31
Description: FUSE, MICRO (0.25A/24V)
F1