Know Your Home Standby Generator - Briggs & Stratton 40220 Installation, Start-Up And Operator's Manual

KNOW YOUR HOME STANDBY GENERATOR

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Air Cleaner Engine Label
Oil
Filter
Exhaust
Port
Air Cleaner — Uses a dry type filter element and foam
precleaner to protect engine by filtering dust and debris out
of intake air..
Battery — 12 Volt DC, 33 Amp-Hour sealed battery provides
power to start the engine. Battery receives trickle charge
whenever generator is not running.
Control Panel — Used for various test, operation and
maintenance functions. See "KNOW YOUR CONTROL
PANEL" on the next page.
Disconnect Box — Convenient junction box for ease of
installation. Allows you to connect to generator output and
disconnect utility input.
FEATURES AND CONTROLS
Lifting Pocket
Fuel Inlet
Oil Fill
Cap/DipStick
Battery
Engine Label (stamped on top of valve cover) — Identifies
engine model and type.
Exhaust Port — High-performance muffler lowers engine
noise to comply with most residential codes.
Fuel Inlet — Attach appropriate fuel supply to generator here.
Lifting Pocket — Provided at each corner for lifting
generator.
Oil Fill Cap/Dipstick — Check and fill engine with
recommended oil here.
Oil Drain Hose — Provided to facilitate oil changing.
Oil Filter — Filters engine oil to prolong generator life.
Unit Data Decal — Identifies unit by serial number.
6
Generator is shown with roof, plastic
access door and control panel door
removed for clarity
Control Panel
(see page 7)
Oil Drain Hose
Unit Data
Decal
Disconnect Box